So my plan based on reading was to get a mini pc and a nas. But then I realized… what is the best way to connect them. So I started doing more reading. And I confused myself.

So a NAS has it’s own CPU and such, and other computers can talk directly to it over the network. But if I am using a mini pc to run the server, then I assume I would want a really fast direct connection to the storage. So it seems like I would want the NAS to be on the network as well as directly connected to the mini PC. And of course the mini pc would need to be on the network as well. Stuff I saw about connecting them directly seemed to pretty much use the Ethernet ports and a crossover cable. So that would mean that both devices would have to have two Ethernet ports, right?

And the bonus question is, would it just be better for the NAS to really be a dumb DAS for the mini pc instead?

Edit to summarize: For having two devices, the consensus is that LAN is good enough (just make sure you have a decent switch between them). A few like doing it all on one device for a variety of reasons.

  • AMillionMonkeys@lemmy.worldEnglish
    1·
    5 months ago

    If you can avoid having you server and the media library on separate systems you should. That means buying (or I suppose building, but I wouldn’t recommend it) a NAS with sufficient processing ability to stream / transcode as much as you need, or stuffing a lot of storage into your mini PC.
    One of the problems you’ll run into if you use separate systems is that it’s non-trivial to get the server to automatically notice new items in the media library and update to include them. I’m sure there are others.

  • Bronzie@sh.itjust.worksEnglish
    1·
    5 months ago

    Mind me asking what your budget is?

    Don’t get me wrong, but it seems you’re just starting out and to avoid biting over to much, it might be smart to look at at least some turn key solutions. Building a custom NAS with loads of drives is fun, but can get complicated.

    I’d say get a pre-built NAS if you can afford to and run everything there. It’s easier and has loads of support available.

    If you feel like you want more power, then consider adding a NUC or even full server later on and migrate over.
    Forget about network speed. Wired is always fast enough. You’d strugle finding new hardware without Gbit these days anyways.

    At least that’s how I started and with a N100 NUC running Proxmox now, I don’t see myself needing to upgrade for a long time. Learning Linux along the way is fun.

    Good luck!

  • ntn888@lemmy.mlEnglish
    0·
    5 months ago

    Since you’re already building a custom server, isn’t it just better to include HDDs in there, and have a single box? (just get a bigger case, SFF for example) It’d be good for power consumption as well. What are you trying to achieve with a separate NAS?

    • SailorsLife@lemmy.worldOPEnglish
      1·
      5 months ago

      Well, mainly it is just what I read in various “guides”. But also it sounds easier to assemble… the minipc is just a box, no need to do any hardware stuff. And I think the NAS is pretty much the same. Plus it would allow me to easily start small on space and then add more (I think).

      Also, I think it would be quieter. I assume putting it all in one would mean basically a tower with lots of fans and what not. The minipc is supposed to be pretty quiet. Don’t know about the NAS though.